Parameters#
About Parameters#
The CCHDO works frequently with many parameters common in hydrography. Provided here is a description of many common parameters encountered in exchange files.
Warning
This list may not contain every parameter which may be encountered in an exchange file. CCHDO is working on providing a machine readable list of ALL parameters which may be encountered in all files. This list will include parameters which CCHDO lacks a description for (known unknown parameters).
Until that time, parameters may appear in exchange formats from the CCHDO which are not documented here. No undocumented parameter or field will cause data integrity or usefulness issues (i.e. all undocumented parameters may be safely ignored).
Definitions#
Provided with each parameter is a set of information in a table, the information included in that table should be interpreted as follows:
- Units:
These are the common units encountered for this parameter as it will appear in the exchange document itself. The special units of “None” means the field will be either blank or contain only whitespace.
- Data Type:
Specifies the allowed type of data in the data records for this parameter. There are three types of data, string (str), integers (int), and decimal. String data types may be any printing character except a comma
,
which is the field seperator. Integer data types may only contain numbers without a decimal point, quality flags are usually integers. Decimal data types may be any real number (including an integer) and may include decimal point, the precision is not specified.- Quality Flags:
Specifies which set of quality flag definitions should be used to interpret a quality flag column for this parameter (if present). Current quality flags are: bottle, water, ctd. See the Quality Codes section for more information
- Error Column Label:
A parameter might contain an error or uncertanty value associated with it. The column which contains the error/uncertanty values for this parameter will have the name listed in this field.
- CF/netCDF Attributes:
When this parameter appears in a CF netCDF file, the units and standard name are determined by the units of the WHP parameter. Not all parameter/unit pairs have CF standard names yet. Some WHP units are not allowed in the units attribute of valid CF netCDF files, of particular note are the temperature units of ITS-90 and IPTS-68 which are both mapped to degC in CF files. These “units” will instead appear in a
reference_scale
attribute of the variable rather than in theunits
attribute.
Unlisted Parameters#
Otherwise valid exchange files which contain parameters, units, or parameter/unit pairs that are not listed in the Parameters list SHALL NOT cause the file to be invalid so long as the rest of the specification is adhered to.
Pass Through#
Authors of software which read and write exchange files SHOULD pass though unlisted parameters, units, parameter/unit pairs, and the associated data columns.
Note
This section is intended for software which is used in data management, it does not impose a requirement on authors only wishing to do analysis.
Parameters#
This section was generated automatically from a
machine readable list of parameters
,
there is also a
validation schema
for the
parameters json.
EXPOCODE#
- Units:
None
- Data Type:
string
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
expocode
None
None
None
The expedition code, assigned by the CCHDO or generated by the user. Used as the unique identifier for the cruise. Usual generation formula is ICES 4 character platform code then the cruise departure date in YYYYMMDD format. The underscore _
character may also be present.
SECT_ID#
- Units:
None
- Data Type:
string
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
section_id
None
None
None
If a repeat of a WOCE section, this is the WHP section identifier. Examples include: A12
, A13.5
, P02
.
Note
There may be inconsistency in the how line numbers are represented. For example, P02
might be present as P2
, these represent the same SECT_ID. Two digit zero padded line numbers are the canonical representation, please inform the CCHDO if non zero padded line numbers are encountered.
LINE#
- Units:
None
- Data Type:
string
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
line_id
None
None
None
A transect line identifier, examples include CalCOFI Lines or an id assigned to the lines of a cruise doing grid type work
Warning
Use the SECT_ID parameter for WOCE/GO-SHIP section ids
STNNBR#
- Units:
None
- Data Type:
string
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
station
None
None
None
The originator’s station identifier. Allowed characters are U+0030 to U+0039, U+0041 to U+005A, U+0061 to U+007A, and U+005F (0-9
, a-z
, A-Z
, and _
)
Note
Numeric-only station identifiers are preferred by many data users, but provision for non numeric station identifiers is retained to maintain compatibility with WOCE records.
CASTNO#
- Units:
None
- Data Type:
integer
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cast
None
None
None
The originator’s cast number.
Note
Where cast number is unknown a default value of 1 MAY be inserted by data processors.
BIOS_CASTID#
- Units:
None
- Data Type:
integer
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
bios_castid
None
None
None
BIOS cast number. Used by the Bermuda Institute of Ocean Sciences in the BATS and Hydrostation S timeseries.
SAMPNO#
- Units:
None
- Data Type:
string
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
sample
None
None
None
The sample number. Often it is the rosette position, however, groups may use their own sampling identification scheme. Allowed characters are U+0030 to U+0039, U+0041 to U+005A, U+0061 to U+007A, and U+005F (0-9
, a-z
, A-Z
, and _
)
Warning
The value may not be numeric, ensure that any software reading the file can handle UTF-8 data of the specified allowed code points.
GEOTR_EVENT#
- Units:
None
- Data Type:
integer
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
geotraces_event
None
None
None
The GEOTRACES Event number. Along with the GEOTRACES sample number, it is used by the GEOTRACES community for sample identification.
GEOTR_SAMPNO#
- Units:
None
- Data Type:
integer
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
geotraces_sample
None
None
None
The GEOTRACES Sample number. Along with the GEOTRACES Event number, it is used by the GEOTRACES community for sample identification.
BIONBR#
- Units:
None
- Data Type:
string
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
bionbr
None
None
None
Sample identification number used by the Bedford Institute of Oceanography (BIO)
EVENT_NUMBER#
- Units:
None
- Data Type:
decimal
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
event_number
None
None
None
Non program specific event number. Some cruises or programs keep track of sequential events that occur on a cruise or across multiple cruises of the same program. There exists program specific event number names of GEOTR_EVENT, BIONBR, and BIOS_CASTID that should be used if they are more appropriate.
BTLNBR#
- Units:
None
- Data Type:
string
- BTLNBR_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
bottle_number
None
None
None
The bottle identification number. This is intended to be a permanent, unique serial number fixed to the sampling device. It may also be the an identifier fixed for the duration of a single expedition. Allowed characters are U+0030 to U+0039, U+0041 to U+005A, U+0061 to U+007A, and U+005F (0-9
, a-z
, A-Z
, and _
)
Note
The bottle number MAY have quality flags.
Warning
Despite the name, the value IS NOT numeric, ensure that any software reading the file can handle UTF-8 data of the specified allowed code points. The CF/netCDF files force the data type to be char, but for historic reasons, the variable name is maintained as bottle_number.
DATE#
- Units:
None
- Data Type:
string
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
date
None
None
None
The UTC date in zero padded YYYYMMDD format. The date reported is usually cast bottom for Bottle files and cast start for CTD files. Valid range for YYYY: 0001-9999. Valid range for MM: 01-12. Valid range for DD: 01-31 (depends on month and year). The format of dates corresponds to the C-strftime format of %Y%m%d
.
The date should be read as a string, but be able to be cast unambiguously to an integer. To convert from integer representation, left pad zeros to match the date format description. For example, the integer 8020202
is the date 08020202
or Feb 2nd, 802. This is a very unlikely situation.
TIME#
- Units:
None
- Data Type:
string
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
time
None
None
None
The UTC time in zero padded hhmm format. A single time should be reported for each cast, usually the time at cast bottom (deepest) is used. The order of preference for the reported time is: cast bottom, cast start, cast end (i.e if cast bottom is not available, the cast start time should be used).
Valid range for hh: 00-24 Valid range for mm: 00-59 The format of times corresponds to the C-strftime format of %H%M
.
The time should be read as a string, but be able to be cast unambiguously into an integer. To convert from an integer, left pad zeros to match the time format description.
Note
Times represented as integers will be present in whp COARDS netcdf files. Times in netcdf files will be anywhere from 1 to 4 digits. E.g. a time of 6 as in integer represents 6 minutes after midnight or 0006
Midnight is a special case in that it has two valid representations: 0000
and 2400
. The date 20140202
at time 0000
is the same instant as the date 20140201
at time 2400
. This corresponds to times allowed by ISO 8601.
Use BTL_TIME to report the time of individual bottle closures.
CF netCDF files will use the standard Time Coordinate as specified in the conventions
Warning
Time is not a required parameter! If time is not present, then the temporal resolution of the data is reduced to a 24 hour period. It is the responsibility of the user of the data to omit files/casts which do not meet their temporal resolution requirements.
LATITUDE#
- Units:
None
- Data Type:
decimal
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
latitude
None
None
latitude
The latitude as a signed decimal number. By convention, is positive in the northern hemisphere and negative in the southern hemisphere. Positive values do not include a +
character (U+002B), negative values are prefixed with a -
character (U+002D).
Note
Only one latitude SHOULD be reported for a cast, typically this is the ship position when the cast is at the bottom (deepest), but this is not guaranteed.
Use BTL_LAT to include positions of individual bottle closures.
Warning
Since this parameter has no units, the positive in the northern hemisphere and negative in the southern hemisphere MUST be strictly adhered to.
The geographic coordinate system is not currently reported.
LONGITUDE#
- Units:
None
- Data Type:
decimal
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
longitude
None
None
longitude
The longitude as a signed decimal number. By convention, is positive in the eastern hemisphere and negative in the western hemisphere. Positive values do not include a +
character (U+002B), negative values are prefixed with a -
character (U+002D).
Note
Only one longitude SHOULD be reported for a cast, typically this is the ship position when the cast is at the bottom (deepest), but this is not guaranteed.
Use BTL_LON to include positions of individual bottle closures.
The longitudes of -180 and 180 describe the same meridian.
Warning
Since this parameter has no units, the positive in the eastern hemisphere and negative in the western hemisphere convention MUST be strictly adhered to.
The geographic coordinate system is not currently reported.
DEPTH#
- Units:
METERS
- Data Type:
decimal
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
btm_depth
METERS
meters
sea_floor_depth_below_sea_surface
The reported depth to the bottom. Corrected depths are preferred to uncorrected depths.
Note
Documentation should be provided describing how the depth was calculated/corrected, typically in the comment fields.
Warning
This is NOT the depth of bottle closures.
CTDPRS#
- Units:
DBAR
- Data Type:
decimal
- CTDPRS_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
pressure
DBAR
dbar
sea_water_pressure
The corrected pressure as measured by the CTD.
Note
Typically does not have quality flags.
CTDRAW#
- Units:
DBAR
- Data Type:
decimal
- CTDRAW_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_pressure_raw
DBAR
dbar
sea_water_pressure
The uncorrected pressure as measured by the CTD. Uncorrected means that no processing has been done (e.g. deck pressure offsets) other than manufacturer calibrations applied.
Note
Typically does not have quality flags.
CTDTMP#
- Units:
ITS-90
IPTS-68
DEG C
- Data Type:
decimal
- CTDTMP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_temperature
ITS-90
degC
sea_water_temperature
ctd_temperature_68
IPTS-68
degC
sea_water_temperature
ctd_temperature_unk
DEG C
degC
sea_water_temperature
The corrected temperature as measured by the CTD.
Note
Typically does not have quality flags.
CTDSAL#
- Units:
PSS-78
- Data Type:
decimal
- CTDSAL_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_salinity
PSS-78
1
sea_water_practical_salinity
The corrected practical salinity as measured (calculated) by the CTD.
CTDSA#
- Units:
G/KG
- Data Type:
decimal
- CTDSA_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_absolute_salinity
G/KG
g/kg
sea_water_absolute_salinity
Absolute salinity calculated using TEOS-10
Warning
This is provided as a convienence, the TEOS-10 manual strongly recomends against including this in observational data.
CTDCT#
- Units:
ITS-90
- Data Type:
decimal
- CTDCT_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_conservative_temperature
ITS-90
degC
sea_water_conservative_temperature
Conservative temperature calcualted using TEOS-10
Warning
This is provided as a convienence, the TEOS-10 manual strongly recomends against including this in observational data.
SALNTY#
- Units:
PSS-78
- Data Type:
decimal
- SALNTY_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
bottle_salinity
PSS-78
1
sea_water_practical_salinity
The practical salinity measured from a bottle sample.
DNSSAL#
- Units:
G/KG
- Data Type:
decimal
- DNSSAL_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
density_salinity
G/KG
g/kg
sea_water_absolute_salinity
Absolute salinity calculated from direct density measurements, also called absolute salinity.
RIANOMALY#
- Units:
ND
- Data Type:
decimal
- RIANOMALY_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
refractive_index_anomaly
ND
1
None
Refractive indxe anomanly from pure water. Typically reported at the sodium D lines of 589.6 nm and 589.0nm
DNSSAL2#
- Units:
G/KG
- Data Type:
decimal
- DNSSAL2_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
density_salinity2
G/KG
g/kg
sea_water_absolute_salinity
Replicate measuremnet of DNSSAL, used in TEOS-10 verification work
SALNTY_DNSSAL#
- Units:
PSS-78
- Data Type:
decimal
- SALNTY_DNSSAL_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
density_salinity_practical_salinity
PSS-78
1
sea_water_practical_salinity
A practical salinity measurement in the lab of the same water sample as DNSSAL, used in TEOS-10 verification work
SALNTY_DNSSAL2#
- Units:
PSS-78
- Data Type:
decimal
- SALNTY_DNSSAL2_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
density_salinity_practical_salinity2
PSS-78
1
sea_water_practical_salinity
Replicate of SALNTY_DNSSAL
CTDSVLSAL#
- Units:
G/KG
- Data Type:
decimal
- CTDSVLSAL_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_sound_velocity_salinity
G/KG
g/kg
sea_water_absolute_salinity
Absolute salinity calculated from sound velocity and temperature, also called absolute salinity.
CTDOXY#
- Units:
UMOL/KG
ML/L
UMOL/L
- Data Type:
decimal
- CTDOXY_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_oxygen
UMOL/KG
umol/kg
moles_of_oxygen_per_unit_mass_in_sea_water
ctd_oxygen_ml_l
ML/L
ml/l
volume_fraction_of_oxygen_in_sea_water
ctd_oxygen_umol_l
UMOL/L
umol l-1
mole_concentration_of_dissolved_molecular_oxygen_in_sea_water
The corrected oxygen measured by the CTD.
CTDOPTOXY#
- Units:
VOLTS
UMOL/KG
- Data Type:
decimal
- CTDOPTOXY_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_optode_oxygen_raw
VOLTS
volts
None
ctd_optode_oxygen
UMOL/KG
umol/kg
None
In situ oxygen from an oxygen optode
Note
This parameter was common when optodes were newer. Today this is often just reported as CTDOXY.
OXYGEN#
- Units:
UMOL/KG
ML/L
- Data Type:
decimal
- OXYGEN_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
oxygen
UMOL/KG
umol/kg
moles_of_oxygen_per_unit_mass_in_sea_water
oxygen_ml_l
ML/L
ml/l
volume_fraction_of_oxygen_in_sea_water
The dissolved oxygen measured in a discrete sample, typically using the Winkler test for dissolved oxygen.
SILCAT#
- Units:
UMOL/KG
UMOL/L
- Data Type:
decimal
- SILCAT_FLAG_W Definitions:
- Error Column Label:
SILUNC
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
silicate
UMOL/KG
umol/kg
moles_of_silicate_per_unit_mass_in_sea_water
silicate_l
UMOL/L
umol l-1
mole_concentration_of_silicate_in_sea_water
The concentration of dissolved silicate in sea water.
NH4#
- Units:
UMOL/KG
- Data Type:
decimal
- NH4_FLAG_W Definitions:
- Error Column Label:
NH4UNC
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ammonium
UMOL/KG
umol/kg
None
The concentration of dissolved ammonium in sea water.
NITRAT#
- Units:
UMOL/KG
UMOL/L
- Data Type:
decimal
- NITRAT_FLAG_W Definitions:
- Error Column Label:
NRAUNC
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
nitrate
UMOL/KG
umol/kg
moles_of_nitrate_per_unit_mass_in_sea_water
nitrate_l
UMOL/L
umol l-1
mole_concentration_of_nitrate_in_sea_water
The concentration of dissolved nitrate in sea water. The chemical formula for the nitrate anion is NO3-.
CTDNITRATE#
- Units:
UMOL/KG
- Data Type:
decimal
- CTDNITRATE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_nitrate
UMOL/KG
umol/kg
moles_of_nitrate_per_unit_mass_in_sea_water
The concentration of dissolved nitrate in sea water measured by an in situ sensor. The chemical formula for the nitrate anion is NO3-.
CTDORP#
- Units:
MILLIVOLTS
- Data Type:
decimal
- CTDORP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_redox_potential
MILLIVOLTS
millivolts
None
Oxidation-reduction (or redox) potential sensor. Measures the tendency of various chemical species to gain or lose electrons. In the ocean, it is useful for detecting hydrothermal plumes. Usually the absolute value of ORP measured by one of these is not useful but the change in potential over the profile is.
Warning
The actual scientific units for this parameter is a voltage, usually reported in millivolts.
NITRIT#
- Units:
UMOL/KG
UMOL/L
- Data Type:
decimal
- NITRIT_FLAG_W Definitions:
- Error Column Label:
NRIUNC
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
nitrite
UMOL/KG
umol/kg
moles_of_nitrite_per_unit_mass_in_sea_water
nitrite_l
UMOL/L
umol l-1
mole_concentration_of_nitrite_in_sea_water
The concentration of dissolved nitrite in sea water. The chemical formula for the nitrite anion is NO2-.
PHSPHT#
- Units:
UMOL/KG
UMOL/L
- Data Type:
decimal
- PHSPHT_FLAG_W Definitions:
- Error Column Label:
PHPUNC
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
phosphate
UMOL/KG
umol/kg
moles_of_phosphate_per_unit_mass_in_sea_water
phosphate_l
UMOL/L
umol l-1
mole_concentration_of_phosphate_in_sea_water
The concentration of dissolved phosphate in sea water. The chemical formula for the phosphate anion is PO4.
NO2+NO3#
- Units:
UMOL/KG
UMOL/L
- Data Type:
decimal
- NO2+NO3_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
nitrite_nitrate
UMOL/KG
umol/kg
moles_of_nitrate_and_nitrite_per_unit_mass_in_sea_water
nitrite_nitrate_l
UMOL/L
umol l-1
mole_concentration_of_nitrate_and_nitrite_in_sea_water
The concentration of dissolved nitrate plus nitrite in sea water. The chemical formula for the nitrite anion is NO2-.
Note
Most modern techniques for determining dissolved nitrate return a value of nitrate (NO3) plus nitrite (NO2). A separate determination is then done for nitrite and the result subtracted by the data originator to obtain nitrate. If no separate nitrite determination was carried out - or in rare cases the nitrite number was not subtracted - data providers should list the result as NO2+NO3. Because nitrite values are in most regions small compared to nitrate, most data users will not adversely affect their results by relabeling NO2+NO3 as NITRAT.
CFC-11#
- Units:
PMOL/KG
PMOL/L
- Data Type:
decimal
- CFC-11_FLAG_W Definitions:
- Error Column Label:
CF11ER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cfc_11
PMOL/KG
pmol/kg
moles_of_cfc11_per_unit_mass_in_sea_water
cfc_11_l
PMOL/L
pmol/l
None
The concentration of dissolved CFC11 in sea water. The chemical formula of CFC11 is CFCl3. The IUPAC name for CFC11 is trichloro(fluoro)methane.
CFC-12#
- Units:
PMOL/KG
PMOL/L
- Data Type:
decimal
- CFC-12_FLAG_W Definitions:
- Error Column Label:
CF12ER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cfc_12
PMOL/KG
pmol/kg
None
cfc_12_l
PMOL/L
pmol/l
None
The concentration of dissolved CFC12 in sea water. The chemical formula for CFC12 is CF2Cl2. The IUPAC name for CFC12 is dichloro(difluoro)methane.
CFC113#
- Units:
PMOL/KG
PMOL/L
- Data Type:
decimal
- CFC113_FLAG_W Definitions:
- Error Column Label:
CF113ER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cfc_113
PMOL/KG
pmol/kg
None
cfc_113_l
PMOL/L
pmol/l
None
The concentration of dissolved CFC113 in sea water. The chemical formula of CFC113 is CCl2FCClF2. The IUPAC name for CFC113 is 1,1,2-trichloro-1,2,2-trifluoroethane.
HCFC-141b#
- Units:
PMOL/KG
- Data Type:
decimal
- HCFC-141b_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
dichlorofluoroethane
PMOL/KG
pmol/kg
None
The concentration of dissolved HCFC-141b in sea water. The chemical formula of HCFC-141b is C2H3Cl2F. The IUPAC name for HCFC-141b is 1,1-Dichloro-1-fluoroethane.
HCFC-142b#
- Units:
PMOL/KG
- Data Type:
decimal
- HCFC-142b_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
chlorodifluoroethane
PMOL/KG
pmol/kg
None
The concentration of dissolved HCFC-142b in sea water. The chemical formula of HCFC-142b is CH3CClF2. The IUPAC name for HCFC-142b is 1-Chloro-1,1-difluoroethane.
HCFC-22#
- Units:
PMOL/KG
- Data Type:
decimal
- HCFC-22_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
chlorodifluoromethane
PMOL/KG
pmol/kg
None
The concentration of dissolved HCFC-22 in sea water. The chemical formula of HCFC-22 is CHClF2. The IUPAC name for HCFC-22 is Chloro(difluoro)methane.
HFC-134A#
- Units:
PMOL/KG
- Data Type:
decimal
- HFC-134A_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hfc_134a
PMOL/KG
pmol/kg
None
The concentration of dissolved HFC-134A in sea water. The chemical formula of HFC-134A is CF3CH2F. The IUPAC name for HFC-134A is 1,1,1,2-Tetrafluoroethane.
HFC-125#
- Units:
PMOL/KG
- Data Type:
decimal
- HFC-125_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
pentafluoroethane
PMOL/KG
pmol/kg
None
The concentration of dissolved HFC-125 in sea water. The chemical formula of HFC-125 is CF3CHF2. The IUPAC name for HFC-125 is pentafluoroethane.
SF6#
- Units:
FMOL/KG
FMOL/L
- Data Type:
decimal
- SF6_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
sulfur_hexifluoride
FMOL/KG
fmol/kg
None
sulfur_hexifluoride_l
FMOL/L
fmol/l
None
The concentration of SF6 (Sulfur hexafluoride) in sea water.
TCARBN#
- Units:
UMOL/KG
- Data Type:
decimal
- TCARBN_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
total_carbon
UMOL/KG
umol/kg
moles_of_dissolved_inorganic_carbon_per_unit_mass_in_sea_water
Total dissovled inorganic carbon
CARBONATE#
- Units:
UMOL/KG
- Data Type:
decimal
- CARBONATE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
carbonate
UMOL/KG
umol/kg
None
Dissolved carbonate ion in seawater, the chemical formula for the carbonate ion is CO32-
ALKALI#
- Units:
UMOL/KG
- Data Type:
decimal
- ALKALI_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
total_alkalinity
UMOL/KG
umol/kg
None
The total alkalinity equivalent concentration (including carbonate, nitrogen, silicate, and borate components).
FCO2#
- Units:
UATM
- Data Type:
decimal
- FCO2_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
fco2
UATM
uatm
fugacity_of_carbon_dioxide_in_sea_water
The fugacity is the measured pressure (or partial pressure) of a real gas corrected for the intermolecular forces of that gas, which allows that corrected quantity to be treated like the pressure of an ideal gas in the ideal gas equation PV = nRT. The partial pressure of a dissolved gas in sea water is the partial pressure in air with which it would be in equilibrium. The partial pressure of a gaseous constituent of air is the pressure that it would exert if all other gaseous constituents were removed, assuming the volume, the temperature, and its number of moles remain unchanged. The chemical formula for carbon dioxide is CO2.
FCO2IN#
- Units:
UATM
- Data Type:
decimal
- FCO2IN_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
fco2_in_situ
UATM
uatm
fugacity_of_carbon_dioxide_in_sea_water
In situ fugacity of CO2 gas
Note
Usually calcualted
FCO2TMP#
- Units:
DEG C
- Data Type:
decimal
- FCO2TMP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
fco2_temperature
DEG C
degC
temperature_of_analysis_of_sea_water
The reporting temperature for FCO2, either a measurement of the equilibrator temperature or adjusted to a standard temperature
PCO2#
- Units:
UATM
- Data Type:
decimal
- PCO2_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
partial_pressure_of_co2
UATM
uatm
partial_pressure_of_carbon_dioxide_in_sea_water
The partial pressure of a dissolved gas in sea water is the partial pressure in air with which it would be in equilibrium. The partial pressure of a gaseous constituent of air is the pressure that it would exert if all other gaseous constituents were removed, assuming the volume, the temperature, and its number of moles remain unchanged. The chemical formula for carbon dioxide is CO2.
XCO2#
- Units:
PPM
- Data Type:
decimal
- XCO2_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
co2_mole_fraction
PPM
1e-6
None
The mole fraction of CO2 in air, wet or dry is unknown.
Warning
This parameter was added because we found several cruises with “PCO2” reported as ppm. The only notes that could we could find where questioning if the values were “wet” or “dry”, which is wondering if pH2O was taken into account. XCO2 as a name was taken from the definition of CO2 expressed as PPM in CO2SYS V25.
Use caution if you are trying to compare this parameter to other (p/f/x)CO2 data
PCO2TMP#
- Units:
DEG C
- Data Type:
decimal
- PCO2TMP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
partial_co2_temperature
DEG C
degC
temperature_of_analysis_of_sea_water
The reporting temperature for PCO2, either a measurement of the equilibrator temperature or adjusted to a standard temperature
PH_TOT#
- Units:
None
- Data Type:
decimal
- PH_TOT_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ph_total_h_scale
None
None
sea_water_ph_reported_on_total_scale
The measure of acidity of seawater, defined as the negative logarithm of the concentration of dissolved hydrogen ions plus bisulfate ions in a sea water medium; when measured the scale is defined according to a series of buffers prepared in artificial seawater containing bisulfate. The quantity may be written as pH(total) = -log([H+](free) + [HSO4-]).
PH#
- Units:
None
- Data Type:
decimal
- PH_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ph_unknown_scale
None
None
None
The measure of acidity of seawater reported on an unknown scale
Warning
The reporting scale is not known. Use caution when comparing this pH to any other pH
PH_NBS#
- Units:
None
- Data Type:
decimal
- PH_NBS_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ph_nbs
None
None
None
The measure of acidity of seawater on the NBS standard pH scale
PH_SWS#
- Units:
None
- Data Type:
decimal
- PH_SWS_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ph_sws
None
None
None
pH reported on the sea water scale
PH_TMP#
- Units:
DEG C
- Data Type:
decimal
- PH_TMP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ph_temperature
DEG C
degC
temperature_of_analysis_of_sea_water
Temperature of the pH measurement
DOC#
- Units:
UMOL/KG
- Data Type:
decimal
- DOC_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
dissolved_organic_carbon
UMOL/KG
umol/kg
None
Dissolved organic carbon
FDOM#
- Units:
RFU
- Data Type:
decimal
- FDOM_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
fdom
RFU
1
None
In lab measured Fluorescent dissolved organic matter
DOC_NASA#
- Units:
UMOL/L
- Data Type:
decimal
- DOC_NASA_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
dissolved_organic_carbon_nasa
UMOL/L
umol l-1
None
Disolved organic carbon as measured by the NASA group and not the normal GO-SHIP one
TRITUM#
- Units:
TU
KBQ/M^3
- Data Type:
decimal
- TRITUM_FLAG_W Definitions:
- Error Column Label:
TRITER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
tritium
TU
1e-18
None
tritium_activity
KBQ/M^3
kBq m-3
None
Fraction of tritium in the water itself
Note
1 TU is 1 tritium atom per 1018 hydrogen atoms
HELIUM#
- Units:
NMOL/KG
NMOL/L
- Data Type:
decimal
- HELIUM_FLAG_W Definitions:
- Error Column Label:
HELIER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
helium
NMOL/KG
nmol/kg
None
helium_l
NMOL/L
nmol/l
None
Dissolved elemental helium gas
DELHE3#
- Units:
PERCNT
- Data Type:
decimal
- DELHE3_FLAG_W Definitions:
- Error Column Label:
DELHER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
delta_helium_3
PERCNT
percent
None
Enrichment of 3He in dissolved helium gas
REFTMP#
- Units:
ITS-90
DEG C
- Data Type:
decimal
- REFTMP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ref_temperature
ITS-90
degC
sea_water_temperature
ref_temperature_c
DEG C
degC
sea_water_temperature
Sea water temperature as measured by a reference thermometer, such as an SBE35. These typically only measure when a bottle is triggered and are part of the discrete data stream rather than the CTD one.
REVPRS#
- Units:
DBAR
- Data Type:
decimal
- REVPRS_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
rev_pressure
DBAR
dbar
sea_water_pressure
Sea water pressure as determined via a pair of reversing thermometers.
REVTMP#
- Units:
ITS-90
IPTS-68
DEG C
- Data Type:
decimal
- REVTMP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
rev_temperature_90
ITS-90
degC
sea_water_temperature
rev_temperature
IPTS-68
degC
sea_water_temperature
rev_temperature_c
DEG C
degC
sea_water_temperature
Sea water temperature as determined via a reversing thermometer.
DELC13#
- Units:
/MILLE
- Data Type:
decimal
- DELC13_FLAG_W Definitions:
- Error Column Label:
C13ERR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
del_carbon_13_dic
/MILLE
1e-3
None
Enrichment of 13C vs 12C in dissolved inorganic carbon (DIC or TCARBN) compared to a reference standard usually VPDB. This is usually written as lower case delta δ13C.
DELC14#
- Units:
/MILLE
- Data Type:
decimal
- DELC14_FLAG_W Definitions:
- Error Column Label:
C14ERR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
del_carbon_14_dic
/MILLE
1e-3
None
Enrichment of 14C vs 12C in dissolved inorganic carbon (DIC or TCARBN) compared to a reference standard usually VPDB. This ratio has been corrected for isotopic fractionation and is usually written as upper case delta Δ14C.
DON#
- Units:
UMOL/KG
- Data Type:
decimal
- DON_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
dissolved_organic_nitrogen
UMOL/KG
umol/kg
None
Dissolved organic nitrogen in sea water. ‘Dissolved organic nitrogen’ describes the nitrogen held in carbon compounds in solution. These are mostly generated by plankton excretion and decay.
TOC#
- Units:
UMOL/KG
UMOL/L
- Data Type:
decimal
- TOC_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
total_organic_carbon
UMOL/KG
umol/kg
None
total_organic_carbon_l
UMOL/L
umol l-1
None
Total organic carbon, includes particulate and dissolved
POC#
- Units:
UG/KG
UG/L
- Data Type:
decimal
- POC_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
particulate_organic_carbon
UG/KG
ug/kg
None
particulate_organic_carbon_l
UG/L
ug/l
None
Particulate organic carbon
D13C_POC#
- Units:
/MILLE
- Data Type:
decimal
- D13C_POC_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d13c_poc
/MILLE
1e-3
None
Enrichment of 13C vs 12C in particulate organic carbon (POC) compared to a reference standard usually VPDB. This is usually written as lower case delta δ13C.
PON#
- Units:
UG/KG
UG/L
UMOL/L
- Data Type:
decimal
- PON_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
particulate_organic_nitrogen
UG/KG
ug/kg
None
particulate_organic_nitrogen_l
UG/L
ug/l
None
particulate_organic_nitrogen_mol
UMOL/L
umol l-1
None
Particulate organic nitrogen
POP#
- Units:
UG/L
UMOL/L
- Data Type:
decimal
- POP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
particulate_organic_phosphorus_l
UG/L
ug/l
None
particulate_organic_phosphorus
UMOL/L
umol l-1
None
Particulate organic phosphorus
PCOD#
- Units:
UG/L
- Data Type:
decimal
- PCOD_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
particulate_chemical_oxygen_demand_l
UG/L
ug/l
None
Patriculate chemical oxygen demand
DOP#
- Units:
UMOL/KG
- Data Type:
decimal
- DOP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
dissolved_organic_phosphorus
UMOL/KG
umol/kg
None
Dissolved organic phosphorus
TDP#
- Units:
UMOL/L
UMOL/KG
- Data Type:
decimal
- TDP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
total_dissolved_phosphorus_l
UMOL/L
umol l-1
None
total_dissolved_phosphorus
UMOL/KG
umol/kg
None
Total dissolved phosphorus, includes organic and inorganic
DATP#
- Units:
PMOL/L
- Data Type:
decimal
- DATP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
dissolved_atp
PMOL/L
pmol/l
None
Dissovled adenosine triphosphate
PATP#
- Units:
PMOL/L
- Data Type:
decimal
- PATP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
particulate_atp
PMOL/L
pmol/l
None
particulate adenosine triphosphate
TDN#
- Units:
UMOL/KG
- Data Type:
decimal
- TDN_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
total_dissolved_nitrogen
UMOL/KG
umol/kg
None
Total dissolved nitrogen, includes organic and inorganic
TON#
- Units:
UMOL/KG
UMOL/L
- Data Type:
decimal
- TON_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
total_organic_nitrogen
UMOL/KG
umol/kg
None
total_organic_nitrogen_l
UMOL/L
umol l-1
None
Total organic nitrogen, includes particulate and dissolved
NEON#
- Units:
NMOL/KG
NMOL/L
- Data Type:
decimal
- NEON_FLAG_W Definitions:
- Error Column Label:
NEONER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
neon
NMOL/KG
nmol/kg
None
neon_l
NMOL/L
nmol/l
None
Dissolved elemental neon gas
DELO18#
- Units:
/MILLE
- Data Type:
decimal
- DELO18_FLAG_W Definitions:
- Error Column Label:
O18ERR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
del_oxygen_18
/MILLE
1e-3
None
Enrichment of the 18O/16O isotopic ratio of the sea water itself compared to VSMOW (Vienna Standard Mean Ocean Water).
DELO17#
- Units:
/MILLE
- Data Type:
decimal
- DELO17_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
del_oxygen_17
/MILLE
1e-3
None
Enrichment of the 17O/16O isotopic ratio of the sea water itself compared to VSMOW (Vienna Standard Mean Ocean Water).
DELD#
- Units:
/MILLE
- Data Type:
decimal
- DELD_FLAG_W Definitions:
- Error Column Label:
DELDERR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
del_deuterium
/MILLE
1e-3
None
Enrichment of deuterium of the sea water itself compared to VSMOW
DELSI30#
- Units:
/MILLE
- Data Type:
decimal
- DELSI30_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
delsi30
/MILLE
1e-3
None
Enrichment of the 30Si/28Si isotopic ratio in silica relative to NBS28
DELN15#
- Units:
/MILLE
- Data Type:
decimal
- DELN15_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
del_nitrogen_15
/MILLE
1e-3
None
Enrichment of the N15/N14 isotopic ratio when compared to the atmosphere
CCL4#
- Units:
PMOL/KG
PMOL/L
- Data Type:
decimal
- CCL4_FLAG_W Definitions:
- Error Column Label:
CCL4ER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
carbon_tetrachloride
PMOL/KG
pmol/kg
None
carbon_tetrachloride_l
PMOL/L
pmol/l
None
Dissolved carbon tetrachloride
NI#
- Units:
UMOL/L
- Data Type:
decimal
- NI_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
nickel
UMOL/L
umol l-1
None
Dissolved elemental nickle
ALUMIN#
- Units:
NMOL/L
- Data Type:
decimal
- ALUMIN_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
dissolved_aluminum
NMOL/L
nmol/l
None
Dissolved elemental aluminium
BARIUM#
- Units:
NMOL/KG
NMOL/L
- Data Type:
decimal
- BARIUM_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
barium
NMOL/KG
nmol/kg
None
barium_l
NMOL/L
nmol/l
None
Dissolved elemental barium
CU#
- Units:
UMOL/L
- Data Type:
decimal
- CU_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
copper
UMOL/L
umol l-1
None
Dissolved elemental copper
FE#
- Units:
NMOL/L
- Data Type:
decimal
- FE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
iron
NMOL/L
nmol/l
mole_concentration_of_dissolved_iron_in_sea_water
Dissolved elemental iron
MN#
- Units:
NMOL/L
- Data Type:
decimal
- MN_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
manganese
NMOL/L
nmol/l
None
Dissolved elemental manganese
CTDFLUOR#
- Units:
MG/M^3
VOLTS
None
- Data Type:
decimal
- CTDFLUOR_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_fluor
MG/M^3
mg/m^3
mass_concentration_of_chlorophyll_in_sea_water
ctd_fluor_raw
VOLTS
volts
None
ctd_fluor_arbitrary
None
None
None
In situ chlorophyll measured by a fluorometer
PAR#
- Units:
UMOL/M^2/SEC
VOLTS
- Data Type:
decimal
- PAR_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
par
UMOL/M^2/SEC
umol m-2 s-1
downwelling_photosynthetic_photon_flux_in_sea_water
par_raw
VOLTS
volts
None
Photosynthetically active radiation. The downwelling photon flux of photons with a wavelength between 400nm and 700nm.
CDOM300#
- Units:
/METER
- Data Type:
decimal
- CDOM300_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdom300
/METER
m^-1
volume_beam_attenuation_coefficient_of_radiative_flux_in_sea_water
Attenuation coefficient of the sample at 300nm
CDOM325#
- Units:
/METER
- Data Type:
decimal
- CDOM325_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdom325
/METER
m^-1
volume_beam_attenuation_coefficient_of_radiative_flux_in_sea_water
Attenuation coefficient of the sample at 325nm
CDOM340#
- Units:
/METER
- Data Type:
decimal
- CDOM340_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdom340
/METER
m^-1
volume_beam_attenuation_coefficient_of_radiative_flux_in_sea_water
Attenuation coefficient of the sample at 340nm
CDOM370#
- Units:
/METER
- Data Type:
decimal
- CDOM370_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdom370
/METER
m^-1
volume_beam_attenuation_coefficient_of_radiative_flux_in_sea_water
Attenuation coefficient of the sample at 370nm
CDOM380#
- Units:
/METER
- Data Type:
decimal
- CDOM380_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdom380
/METER
m^-1
volume_beam_attenuation_coefficient_of_radiative_flux_in_sea_water
Attenuation coefficient of the sample at 380nm
CDOM412#
- Units:
/METER
- Data Type:
decimal
- CDOM412_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdom412
/METER
m^-1
volume_beam_attenuation_coefficient_of_radiative_flux_in_sea_water
Attenuation coefficient of the sample at 412nm
CDOM443#
- Units:
/METER
- Data Type:
decimal
- CDOM443_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdom443
/METER
m^-1
volume_beam_attenuation_coefficient_of_radiative_flux_in_sea_water
Attenuation coefficient of the sample at 442nm
CDOM490#
- Units:
/METER
- Data Type:
decimal
- CDOM490_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdom490
/METER
m^-1
volume_beam_attenuation_coefficient_of_radiative_flux_in_sea_water
Attenuation coefficient of the sample at 490nm
CDOM555#
- Units:
/METER
- Data Type:
decimal
- CDOM555_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdom555
/METER
m^-1
volume_beam_attenuation_coefficient_of_radiative_flux_in_sea_water
Attenuation coefficient of the sample at 555nm
SPAR#
- Units:
VOLTS
- Data Type:
decimal
- SPAR_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
spar_raw
VOLTS
volts
None
Surfance reference for PAR, usually mounted on the top of the ship with a shield to block upwelling light. The downwelling photon flux of photons with a wavelength between 400nm and 700nm.
CDOM2C#
- Units:
None
- Data Type:
decimal
- CDOM2C_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdom2c
None
None
None
CDOM2 (carbohydrate and neutral sugar) charicterization
Note
So far CCHDO doesn’t have any data or references on how these data are report, they might go to NASA SeaBASS
CDOM3C#
- Units:
None
- Data Type:
decimal
- CDOM3C_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdom3c
None
None
None
CDOM3 (photolysis) charicterization
Note
So far CCHDO doesn’t have any data or references on how these data are report, they might go to NASA SeaBASS
CDOMSL#
- Units:
1/NM
- Data Type:
decimal
- CDOMSL_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdomsl
1/NM
1/nm
None
Log spectral slope of absorption spectrum (320-400 nm) computed by linear regression of log-transformed data
CDOMSN#
- Units:
1/NM
- Data Type:
decimal
- CDOMSN_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdomsn
1/NM
1/nm
None
Log spectral slope if absorption spectrum (320-400 nm) computed by non-linear curve fit
I-129#
- Units:
BQ/M^3
E7/KG
- Data Type:
decimal
- I-129_FLAG_W Definitions:
- Error Column Label:
I129ER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
iodine_129
BQ/M^3
Bq m-3
None
iodine_129_conc
E7/KG
1e7 kg-1
None
Dissolved 129I in sea water, may be reported as an activity (Bq) or as an ammount of substance (n) but not usually in mols.
PLUTO#
- Units:
MBQ/M^3
- Data Type:
decimal
- PLUTO_FLAG_W Definitions:
- Error Column Label:
PLUTOER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
plutonium
MBQ/M^3
mBq m-3
None
Plutonium decay rate from all isotopes
RA-226#
- Units:
DM/.1MG
- Data Type:
decimal
- RA-226_FLAG_W Definitions:
- Error Column Label:
RA-226E
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
radium_226
DM/.1MG
0.000166 Bq/kg
None
Specific activity of 226Ra
Note
units are disintegrations per minute per 100kg
RA-228#
- Units:
DM/.1MG
- Data Type:
decimal
- RA-228_FLAG_W Definitions:
- Error Column Label:
RA-228E
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
radium_228
DM/.1MG
0.000166 Bq/kg
None
Specific activity of 228Ra
Note
units are disintegrations per minute per 100kg
CTDXMISS#
- Units:
%TRANS
VOLTS
- Data Type:
decimal
- CTDXMISS_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_transmissometer
%TRANS
1e-2
None
ctd_transmissometer_raw
VOLTS
volts
None
Transmissivity of light in sea water, has path length and wavelength dependencies
Note
Standard rosette mounted transmissometers have a path length of 25cm and operate in the “red” wavelengths of around 640 to 660nm. These wavelengths provide a good estimate of the attenuation due to particles.
CTDBEAMCP#
- Units:
/METER
- Data Type:
decimal
- CTDBEAMCP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_beamcp
/METER
m^-1
volume_beam_attenuation_coefficient_of_radiative_flux_in_sea_water_corrected_for_pure_water_attenuance
Radiative flux is the sum of shortwave and longwave radiative fluxes. In accordance with common usage in geophysical disciplines, “flux” implies per unit area, called “flux density” in physics. The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. Attenuation is the sum of absorption and scattering. Attenuation is sometimes called “extinction”. Beam attenuation refers to the decrease of radiative flux along the direction of the incident path. It is distinguished from attenuation of the downwelling component of radiative flux from any incident direction, also called “diffuse” attenuation. Corrected for pure water attendance means the attenuation coefficient has been adjusted/calibrated to remove the influence of absorption/scattering from the water itself.
CTDBETA700#
- Units:
VOLTS
M^-1/SR
- Data Type:
decimal
- CTDBETA700_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_beta700_raw
VOLTS
volts
None
ctd_beta700
M^-1/SR
m-1 sr-1
volume_scattering_function_of_radiative_flux_in_sea_water
Volume scattering function at 700nm with a centroid angle of 142 degrees.
Boss, E.B. and N. Haëntjens, 2016. Primer regarding measurements of chlorophyll fluorescence and the backscattering coefficient with WETLabs FLBB on profiling floats. SOCCOM Tech. Rep. 2016-1. https://soccom.princeton.edu/sites/default/files/files/SOCCOM_2016-1_Bio-optics-primer.pdf
Warning
This paramter is the bacscattering function (Beta) it is NOT the backscattering coefficient due to particles commonly called Bbp
BEAMAP#
- Units:
/METER
- Data Type:
decimal
- BEAMAP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
beamap
/METER
m^-1
volume_absorption_coefficient_of_radiative_flux_in_sea_water
Volume beam absorption in sea water
CTDBBP700#
- Units:
/METER
- Data Type:
decimal
- CTDBBP700_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_bbp700
/METER
m^-1
None
Volume scattering coefficient due to particles at 700nm.
Boss, E.B. and N. Haëntjens, 2016. Primer regarding measurements of chlorophyll fluorescence and the backscattering coefficient with WETLabs FLBB on profiling floats. SOCCOM Tech. Rep. 2016-1. http://soccom.princeton.edu/sites/default/files/files/SOCCOM_2016-1_Bio-opticsprimer.pdf.
Warning
This paramter is the bacscattering coefficient due to particles (Bbp) it is NOT the backscattering function called Beta
CTDBETA650_124#
- Units:
M^-1/SR
- Data Type:
decimal
- CTDBETA650_124_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_beta650_124
M^-1/SR
m-1 sr-1
volume_scattering_function_of_radiative_flux_in_sea_water
Volume scattering function at 650nm with a centroid angle of 124 degrees.
Boss, E.B. and N. Haëntjens, 2016. Primer regarding measurements of chlorophyll fluorescence and the backscattering coefficient with WETLabs FLBB on profiling floats. SOCCOM Tech. Rep. 2016-1. https://soccom.princeton.edu/sites/default/files/files/SOCCOM_2016-1_Bio-optics-primer.pdf
Note
This may be incorrectly reported as having an angle of 117 degrees.
Warning
This parameter is the backscattering function (Beta) it is NOT the backscattering coefficient due to particles commonly called Bbp
CTDTURB#
- Units:
FTU
NTU
VOLTS
- Data Type:
decimal
- CTDTURB_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_turbidity_ftu
FTU
1
None
ctd_turbidity_ntu
NTU
1
sea_water_turbidity
ctd_turbidity_raw
VOLTS
volts
None
Turbidity describes the light scattered back (or passed though depending on units) depending on particle loading in the water. It is a dimensionless quantity.
CTDCDOM#
- Units:
QSU
VOLTS
- Data Type:
decimal
- CTDCDOM_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_cdom
QSU
1
concentration_of_colored_dissolved_organic_matter_in_sea_water_expressed_as_equivalent_mass_fraction_of_quinine_sulfate_dihydrate
ctd_cdom_raw
VOLTS
volts
None
In situ CDOM measured via a uv fluorometer
AR-39#
- Units:
PCTMOD
- Data Type:
decimal
- AR-39_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
argon_39
PCTMOD
1e-2
None
39Ar enrichment/depletion compared to modern atmospheric ratios
Note
The units mean ‘% modern’
CS-137#
- Units:
DM/.1MG
BQ/M^3
MBQ/KG
- Data Type:
decimal
- CS-137_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cesium_137
DM/.1MG
0.000166 Bq/kg
None
cesium_137_bq
BQ/M^3
Bq m-3
None
cesium_137_bq_kg
MBQ/KG
mBq kg-1
None
Activity of 137Cs in seawater
Note
units are disintegrations per minute per 100kg
CS-134#
- Units:
BQ/M^3
MBQ/KG
- Data Type:
decimal
- CS-134_FLAG_W Definitions:
- Error Column Label:
CS134ER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cesium_134_bq
BQ/M^3
Bq m-3
None
cesium_134_bq_kg
MBQ/KG
mBq kg-1
None
Activity of 134Cs in seawater
KR-85#
- Units:
DM/MG
- Data Type:
decimal
- KR-85_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
krypton_85
DM/MG
0.0000166 Bq/kg
None
Specific activity of 85Kr
Note
units are disintegrations per minute per 1000kg
SR-90#
- Units:
DM/.1MG
- Data Type:
decimal
- SR-90_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
strontium_90
DM/.1MG
0.000166 Bq/kg
None
Specific activity of 90Sr
Note
units are disintegrations per minute per 100kg
N2O#
- Units:
NMOL/KG
NMOL/L
- Data Type:
decimal
- N2O_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
nitrous_oxide
NMOL/KG
nmol/kg
None
nitrous_oxide_l
NMOL/L
nmol/l
None
Dissolved nitrous oxide gas in sea water
RA-8/6#
- Units:
None
- Data Type:
decimal
- RA-8/6_FLAG_W Definitions:
- Error Column Label:
RA-8/6E
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
radium_228_226
None
None
None
Radtio of the activities of 228Ra to 226Ra
QUALT1#
- Units:
None
- Data Type:
string
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
quality_word_one
None
None
None
Quality code 1, this is not used in exchange files. In WOCE SEA and CTD files it represents the quality code assigned by the investigator responsible for the measurement. The quality code from QUALT1 is used as the FLAG_W in exchange files if QUALT2 is not available
QUALT2#
- Units:
None
- Data Type:
string
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
quality_word_two
None
None
None
Quality code 2, this is not used in exchange files. In WOCE SEA and CTD files it represents the quality code assigned by an independent data quality evaluator (DQE). When available this is the code used in exchange file FLAG_W columns.
MCHFRM#
- Units:
PMOL/KG
- Data Type:
decimal
- MCHFRM_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
methyl_chloroform
PMOL/KG
pmol/kg
None
The concentration of dissolved methyl chloroform in sea water. The IUPAC name for methyl chloroform is 1,1,1-Trichloroethane.
IODATE#
- Units:
NMOL/KG
NMOL/L
- Data Type:
decimal
- IODATE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
iodate
NMOL/KG
nmol/kg
None
iodate_l
NMOL/L
nmol/l
None
Dissolved iodate IO3
IODIDE#
- Units:
NMOL/KG
- Data Type:
decimal
- IODIDE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
iodide
NMOL/KG
nmol/kg
None
Dissolved elemental iodine
CHLORA#
- Units:
UG/KG
UG/L
- Data Type:
decimal
- CHLORA_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
chlorophyll_a_ug_kg
UG/KG
ug/kg
mass_fraction_of_chlorophyll_a_in_sea_water
chlorophyll_a
UG/L
ug/l
mass_concentration_of_chlorophyll_a_in_sea_water
chlorophyll-a. Chlorophylls are the green pigments found in most plants, algae and cyanobacteria; their presence is essential for photosynthesis to take place. There are several different forms of chlorophyll that occur naturally. All contain a chlorin ring (chemical formula C20H16N4) which gives the green pigment and a side chain whose structure varies. The naturally occurring forms of chlorophyll contain between 35 and 55 carbon atoms. Chlorophyll-a is the most commonly occurring form of natural chlorophyll. The chemical formula of chlorophyll-a is C55H72O5N4Mg.
PPHYTN#
- Units:
UG/KG
UG/L
- Data Type:
decimal
- PPHYTN_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
phaeophytin
UG/KG
ug/kg
None
phaeophytin_ug_l
UG/L
ug/l
None
Phaeophytin
CH3CL#
- Units:
PMOL/KG
- Data Type:
decimal
- CH3CL_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
methyl_chloride
PMOL/KG
pmol/kg
None
Concentration of Methyl Chloride
CH4#
- Units:
NMOL/KG
NMOL/L
- Data Type:
decimal
- CH4_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
methane
NMOL/KG
nmol/kg
None
methane_l
NMOL/L
nmol/l
None
Methane
DMS#
- Units:
NMOL/L
- Data Type:
decimal
- DMS_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
dimethyl_sulfide
NMOL/L
nmol/l
None
The chemical formula for dimethyl sulfide is (CH3)2S. Dimethyl sulfide is sometimes referred to as DMS.
N2#
- Units:
UMOL/KG
- Data Type:
decimal
- N2_FLAG_W Definitions:
- Error Column Label:
N2_ERROR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
nitrogen
UMOL/KG
umol/kg
None
Dissolved elemental nitrogen gas (N2) in sea water.
CALCIUM#
- Units:
MMOL/KG
- Data Type:
decimal
- CALCIUM_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
calcium
MMOL/KG
mmol kg-1
None
Dissolved elemental calcium
ARGON#
- Units:
UMOL/KG
UMOL/L
- Data Type:
decimal
- ARGON_FLAG_W Definitions:
- Error Column Label:
ARGONER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
argon
UMOL/KG
umol/kg
None
argon_l
UMOL/L
umol l-1
None
Dissolved elemental argon
14C-DOC#
- Units:
/MILLE
- Data Type:
decimal
- 14C-DOC_FLAG_W Definitions:
- Error Column Label:
14C-DOCERR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
dissolved_organic_carbon_14
/MILLE
1e-3
None
Enrichment of 14C vs 12C in DOC compared to a reference standard usually VPDB. This ratio has been corrected for isotopic fractionation and is usually written as upper case delta Δ14C.
13C-DOC#
- Units:
/MILLE
- Data Type:
decimal
- 13C-DOC_FLAG_W Definitions:
- Error Column Label:
13C-DOCERR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
dissolved_organic_carbon_13
/MILLE
1e-3
None
Enrichment of 13C vs 12C in DOC compared to a reference standard usually VPDB. This is usually written as lower case delta δ13C.
D15N_NO3#
- Units:
/MILLE
- Data Type:
decimal
- D15N_NO3_FLAG_W Definitions:
- Error Column Label:
D15N_NO3_ERROR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d15n_no3
/MILLE
1e-3
None
Enrichment of the 15N/14N isotopic ratio of dissolved nitrate
D15N_NO2#
- Units:
/MILLE
- Data Type:
decimal
- D15N_NO2_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d15n_no2
/MILLE
1e-3
None
Enrichment of the 15N/14N isotopic ratio of dissolved nitrite
D15N_NH4#
- Units:
/MILLE
- Data Type:
decimal
- D15N_NH4_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d15n_nh4
/MILLE
1e-3
None
Enrichment of the 15N/14N isotopic ratio of dissolved ammonium
D15N_N2O#
- Units:
/MILLE
- Data Type:
decimal
- D15N_N2O_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d15n_n2o
/MILLE
1e-3
None
Enrichment of the 15N/14N isotopic ratio of dissolved nitrus oxide, this parameter a subsitution of 15N for 14N in either position of the molecule. This is sometimes called “bulk” D15N.
D15N_ALPHA_N2O#
- Units:
/MILLE
- Data Type:
decimal
- D15N_ALPHA_N2O_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d15n_alpha_n2o
/MILLE
1e-3
None
Enrichment of 15N vs 14N in N2O (nitrous oxide) where the substitution has occurred at the center position of the N2O molecule as compared to a standard. N2O where the substitution has occurred in the end nitrogen atom is called D15N_BETA and is not usually measured. D15N_BETA can be calculated from bulk D15N and D15N_ALPHA using equation 25 from Toyoda and Yoshida 1999 [Toyoda1999]
Toyoda and Yoshida give the value of A=0.998, though this needs to be determined experimentally for the standard in use. We have seen data using a value of A=1 in data submitted to CCHDO.
Determination of Nitrogen Isotopomers of Nitrous Oxide on a Modified Isotope Ratio Mass Spectrometer; Sakae Toyoda and Naohiro Yoshida; Analytical Chemistry 1999 71 (20), 4711-4718; DOI: 10.1021/ac9904563
D15N_NO2+NO3#
- Units:
/MILLE
- Data Type:
decimal
- D15N_NO2+NO3_FLAG_W Definitions:
- Error Column Label:
D15N_NO2+NO3_ERROR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d15n_nitrite_nitrate
/MILLE
1e-3
None
Ratio of 15N to 14N of nitrite+nitrate in the sample vs the ratio of 15N to 14N in a reference standard (VMSOW)
D15N_PON#
- Units:
/MILLE
- Data Type:
decimal
- D15N_PON_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d15n_pon
/MILLE
1e-3
None
Enrichment of the 15N/14N isotopic ratio of particualte organic nitrogen
D15N_TDN#
- Units:
/MILLE
- Data Type:
decimal
- D15N_TDN_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d15n_tdn
/MILLE
1e-3
None
Enrichment of the 15N/14N isotopic ratio of total dissolved nitrogen
D18O_NO2+NO3#
- Units:
/MILLE
- Data Type:
decimal
- D18O_NO2+NO3_FLAG_W Definitions:
- Error Column Label:
D18O_NO2+NO3_ERROR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d18o_nitrite_nitrate
/MILLE
1e-3
None
Ratio of 18O to 16O of nitrite+nitrate in the sample vs the ratio of 18O to 16O of a reference standard (VMSOW)
D18O_NO3#
- Units:
/MILLE
- Data Type:
decimal
- D18O_NO3_FLAG_W Definitions:
- Error Column Label:
D18O_NO3_ERROR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d18o_nitrate
/MILLE
1e-3
None
Ratio of 18O to 16O of nitrate in the sample vs the ratio of 18O to 16O of a reference standard (VMSOW)
D18O_NO2#
- Units:
/MILLE
- Data Type:
decimal
- D18O_NO2_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d18o_nitrite
/MILLE
1e-3
None
Ratio of 18O to 16O of nitrite in the sample vs the ratio of 18O to 16O of a reference standard (VMSOW)
D18O_N2O#
- Units:
/MILLE
- Data Type:
decimal
- D18O_N2O_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d18o_nitrust_oxide
/MILLE
1e-3
None
Ratio of 18O to 16O of nitrus oxide in the sample vs the ratio of 18O to 16O of a reference standard (VMSOW)
UREA#
- Units:
UMOL/KG
- Data Type:
decimal
- UREA_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
urea
UMOL/KG
umol/kg
None
Urea has the chemical formula CO(NH2)2
TOT_CHL_A#
- Units:
MG/M^3
- Data Type:
decimal
- TOT_CHL_A_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_tot_chl_a
MG/M^3
mg/m^3
mass_concentration_of_chlorophyll_a_in_sea_water
Total chlorophyll a measured using HPLC
SeaBass Description:HPLC DV_Chl_a + MV_Chl_a + Chlide_a + Chl_a_allom + Chl_a_prime
Note
A different measurement than CHLORA
TOT_CHL_B#
- Units:
MG/M^3
- Data Type:
decimal
- TOT_CHL_B_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_tot_chl_b
MG/M^3
mg/m^3
mass_concentration_of_chlorophyll_b_in_sea_water
HPLC DV_Chl_b + MV_Chl_b
TOT_CHL_C#
- Units:
MG/M^3
- Data Type:
decimal
- TOT_CHL_C_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_tot_chl_c
MG/M^3
mg/m^3
mass_concentration_of_chlorophyll_c_in_sea_water
HPLC chl_c1 + chl_c2 (chl_c1c2) + chl_c3
ALPHA-BETA-CAR#
- Units:
MG/M^3
- Data Type:
decimal
- ALPHA-BETA-CAR_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_alpha_beta_carotenes
MG/M^3
mg/m^3
mass_concentration_of_carotene_in_sea_water
HPLC Alpha (Beta,epsilon) + Beta (Beta,beta) Carotenes
BUT-FUCO#
- Units:
MG/M^3
- Data Type:
decimal
- BUT-FUCO_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_19butanoyloxyfucoxanthin
MG/M^3
mg/m^3
mass_concentration_of_19_butanoyloxyfucoxanthin_in_sea_water
HPLC 19’-Butanoyloxyfucoxanthin
HEX-FUCO#
- Units:
MG/M^3
- Data Type:
decimal
- HEX-FUCO_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_19_hexanoyloxyfucoxanthin
MG/M^3
mg/m^3
mass_concentration_of_19_hexanoyloxyfucoxanthin_in_sea_water
HPLC 19’-Hexanoyloxyfucoxanthin
ALLO#
- Units:
MG/M^3
- Data Type:
decimal
- ALLO_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_alloxanthin
MG/M^3
mg/m^3
None
HPLC Alloxanthin
ANTH#
- Units:
MG/M^3
- Data Type:
decimal
- ANTH_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hpld_antheraxanthin
MG/M^3
mg/m^3
None
HPLC Antheraxanthin
DIADINO#
- Units:
MG/M^3
- Data Type:
decimal
- DIADINO_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_diadinoxanthin
MG/M^3
mg/m^3
mass_concentration_of_diadinoxanthin_in_sea_water
HPLC Diadinoxanthin
DIATO#
- Units:
MG/M^3
- Data Type:
decimal
- DIATO_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_diatoxanthin
MG/M^3
mg/m^3
None
HPLC Diatoxanthin
HFUCO#
- Units:
MG/M^3
- Data Type:
decimal
- HFUCO_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_fucoxanthin
MG/M^3
mg/m^3
mass_concentration_of_fucoxanthin_in_sea_water
HPLC Fucoxanthin
PERID#
- Units:
MG/M^3
- Data Type:
decimal
- PERID_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_peridinin
MG/M^3
mg/m^3
mass_concentration_of_peridinin_in_sea_water
HPLC Peridinin
ZEA#
- Units:
MG/M^3
- Data Type:
decimal
- ZEA_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_zeaxanthin
MG/M^3
mg/m^3
mass_concentration_of_zeaxanthin_in_sea_water
HPLC Zeaxanthin
MV_CHL_A#
- Units:
MG/M^3
- Data Type:
decimal
- MV_CHL_A_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_monovinyl_chlorophyll_a
MG/M^3
mg/m^3
mass_concentration_of_monovinyl_chlorophyll_a_in_sea_water
HPLC Monovinyl Chlorophyll a
DV_CHL_A#
- Units:
MG/M^3
- Data Type:
decimal
- DV_CHL_A_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_divinyl_chlorophyll_a
MG/M^3
mg/m^3
mass_concentration_of_divinyl_chlorophyll_a_in_sea_water
HPLC Divinyl Chlorophyll a
CHLIDE_A#
- Units:
MG/M^3
- Data Type:
decimal
- CHLIDE_A_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_chlorophyllide_a
MG/M^3
mg/m^3
mass_concentration_of_chlorophyllide_a_in_sea_water
HPLC Chlorophyllide a
MV_CHL_B#
- Units:
MG/M^3
- Data Type:
decimal
- MV_CHL_B_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_monovinyl_chlorophyll_b
MG/M^3
mg/m^3
None
HPLC Monovinyl Chlorophyll b
DV_CHL_B#
- Units:
MG/M^3
- Data Type:
decimal
- DV_CHL_B_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_divinyl_chlorophyll_b
MG/M^3
mg/m^3
None
HPLC Divinyl Chlorophyll B
CHL_C1C2#
- Units:
MG/M^3
- Data Type:
decimal
- CHL_C1C2_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_chlorophyll_c1_c2
MG/M^3
mg/m^3
mass_concentration_of_chlorophyll_c1_and_chlorophyll_c2_in_sea_water
HPLC Chlorophyll c1 + c2
CHL_C2#
- Units:
MG/M^3
- Data Type:
decimal
- CHL_C2_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_chlorophyll_c2
MG/M^3
mg/m^3
None
HPLC Chlorophyll c2
CHL_C3#
- Units:
MG/M^3
- Data Type:
decimal
- CHL_C3_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_chlorophyll_c3
MG/M^3
mg/m^3
mass_concentration_of_chlorophyll_c3_in_sea_water
HPLC Chlorophyll c3
LUT#
- Units:
MG/M^3
- Data Type:
decimal
- LUT_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_lutein
MG/M^3
mg/m^3
mass_concentration_of_lutein_in_sea_water
HPLC Lutein
NEO#
- Units:
MG/M^3
- Data Type:
decimal
- NEO_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_neoxanthin
MG/M^3
mg/m^3
None
HPLC Neoxanthin
VIOLA#
- Units:
MG/M^3
- Data Type:
decimal
- VIOLA_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_violaxanthin
MG/M^3
mg/m^3
mass_concentration_of_violaxanthin_in_sea_water
HPLC Violaxanthin
PHYTIN_A#
- Units:
MG/M^3
- Data Type:
decimal
- PHYTIN_A_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_pheophytin_a
MG/M^3
mg/m^3
None
HPLC Pheophytin a
PHIDE_A#
- Units:
MG/M^3
- Data Type:
decimal
- PHIDE_A_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_pheophorbide_a
MG/M^3
mg/m^3
None
HPLC Pheophorbide a
PRAS#
- Units:
MG/M^3
- Data Type:
decimal
- PRAS_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_prasinoxanthin
MG/M^3
mg/m^3
mass_concentration_of_prasinoxanthin_in_sea_water
HPLC Prasinoxanthin
GYRO#
- Units:
MG/M^3
- Data Type:
decimal
- GYRO_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_gyroxanthin_diester
MG/M^3
mg/m^3
None
HPLC Gyroxanthin-Diester
BTL_DATE#
- Units:
None
- Data Type:
string
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
bottle_date
None
None
None
Date of an individual bottle closure in the same format as DATE, for the canonical reported station date, use DATE
BTL_TIME#
- Units:
None
- Data Type:
string
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
bottle_time
None
None
None
Time of an individual bottle closure in the same format as TIME, for the canonical reported station time, use TIME
CTDDEPTH#
- Units:
METERS
- Data Type:
decimal
- CTDDEPTH_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
package_depth
METERS
meters
depth
The calcualted depth of the CTD itself for this pressure level
Warning
DEPTH without the CTD prefix is the distance to the sea floor.
ODF_CTDPRS#
- Units:
DBAR
- Data Type:
decimal
- ODF_CTDPRS_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
odf_pressure
DBAR
dbar
None
The pressure as corrected by ODF acquisition software. It will often be equivalent to the reported CTDPRS value. When ODF_CTDPRS is present in a datafile, the CTDPRS value came from the instrument manufacturers acquisition software.
BTL_LAT#
- Units:
None
- Data Type:
decimal
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
bottle_latitude
None
None
latitude
Latitude (ship position) of an individual bottle closure in the same format as LATITUDE, for the canonical reported station latitude, use LATITUDE
BTL_LON#
- Units:
None
- Data Type:
decimal
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
bottle_longitude
None
None
longitude
Longitude (ship position) of an individual bottle closure in the same format as LONGITUDE, for the canonical reported station longitude, use LONGITUDE
CTDNOBS#
- Units:
None
- Data Type:
integer
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_number_of_observations
None
None
number_of_observations
The number of discrete observations from which the values of another data variable have been derived
CTDETIME#
- Units:
SECONDS
- Data Type:
decimal
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_elapsed_time
SECONDS
seconds
None
The elapsed time of CTD pressure bin
INSTRUMENT_ID#
- Units:
None
- Data Type:
string
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
instrument_id
None
None
None
The serial number of the CTD. In the case of SBE9plus, this is the serial number of the main housing, not the sensors.
SAMPLING_RATE#
- Units:
HZ
- Data Type:
decimal
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ctd_sampling_rate
HZ
1/s
None
The sampling rate of the CTD
THETA#
- Units:
DEG C
ITS-90
IPTS-68
- Data Type:
decimal
- THETA_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
potential_temperature_c
DEG C
degC
sea_water_potential_temperature
potential_temperature
ITS-90
degC
sea_water_potential_temperature
potential_temperature_68
IPTS-68
degC
sea_water_potential_temperature
Sea water potential temperature is the temperature a parcel of sea water would have if moved adiabatically to sea level pressure.
Note
Typically does not have quality flags.
AOU#
- Units:
UMOL/KG
- Data Type:
decimal
- AOU_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
apparent_oxygen_utilization
UMOL/KG
umol/kg
apparent_oxygen_utilization
Apparent Oxygen Utilization (AOU) is the difference between measured dissolved oxygen concentration in water, and the equilibrium saturation concentration of dissolved oxygen in water with the same physical and chemical properties.
ARABI#
- Units:
NMOL/KG
- Data Type:
decimal
- ARABI_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
arabinose
NMOL/KG
nmol/kg
None
Concentration of Arabanose after hydrolysis
BACT#
- Units:
E8/L
- Data Type:
decimal
- BACT_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
bacterial_cell_count
E8/L
1e8 l-1
None
Cell count of non pigmented heterotrophic bacterioplankton through FCM
CELLCOUNT#
- Units:
/L
- Data Type:
decimal
- CELLCOUNT_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cellcount
/L
l-1
None
Count of all organic cells in a discerete sample
SYN#
- Units:
E6/L
- Data Type:
decimal
- SYN_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
synechococcus_cell_count
E6/L
1e6 l-1
None
Synechococcus Cell Count
PEUK#
- Units:
E6/L
- Data Type:
decimal
- PEUK_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
picoeukaryote_cell_counts
E6/L
1e6 l-1
None
Pigmented Picoeukaryotes cell count
PROC#
- Units:
E7/L
- Data Type:
decimal
- PROC_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
prochlorophyte_cell_count
E7/L
1e7 l-1
None
Prochlorophyte Cell Count
BLACKC#
- Units:
UMOL/L
- Data Type:
decimal
- BLACKC_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
black_carbon
UMOL/L
umol l-1
None
Black carbon (e.g. soot) concentration
BRDU#
- Units:
PMOL/L/H
- Data Type:
decimal
- BRDU_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
brdu_uptake
PMOL/L/H
pmol l-1 h-1
None
Bacterial Production via BrdU (Bromodeoxyuridine ) uptake Method
CH3BR#
- Units:
PMOL/KG
- Data Type:
decimal
- CH3BR_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
methyl_bromide
PMOL/KG
pmol/kg
None
Concentration of Methyl Bromide
CH3I#
- Units:
PMOL/KG
- Data Type:
decimal
- CH3I_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
methyl_iodide
PMOL/KG
pmol/kg
None
Concentration of Methyl Iodide
DCNS#
- Units:
NMOL/KG
- Data Type:
decimal
- DCNS_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
dcns
NMOL/KG
nmol/kg
None
Dissolved Combined Neutral Sugars
FUCO#
- Units:
NMOL/KG
- Data Type:
decimal
- FUCO_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
fucose
NMOL/KG
nmol/kg
None
Concentration of Fucose after hydrolyses
GALA#
- Units:
NMOL/KG
- Data Type:
decimal
- GALA_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
galactose
NMOL/KG
nmol/kg
None
Concentration of Galactose after hydrolysis
GLUC#
- Units:
NMOL/KG
- Data Type:
decimal
- GLUC_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
glucose
NMOL/KG
nmol/kg
None
Concentration of Glucose after hydrolysis
MAN#
- Units:
NMOL/KG
- Data Type:
decimal
- MAN_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
mannose
NMOL/KG
nmol/kg
None
Concentration of Mannose after hydrolysis
RHAM#
- Units:
NMOL/KG
- Data Type:
decimal
- RHAM_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
rhamnose
NMOL/KG
nmol/kg
None
Concetration of Rhamnose after hydrolysis
LAB_DEN#
- Units:
KG/M^3
- Data Type:
decimal
- LAB_DEN_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
density
KG/M^3
kg m-3
None
Density measured in a lab, not calcualted from temperature, salinity, and pressure
KRYPTON#
- Units:
NMOL/KG
NMOL/L
- Data Type:
decimal
- KRYPTON_FLAG_W Definitions:
- Error Column Label:
KRYPTONER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
krypton
NMOL/KG
nmol/kg
None
krypton_l
NMOL/L
nmol/l
None
Dissolved krypton gas in seawater
XENON#
- Units:
NMOL/KG
NMOL/L
- Data Type:
decimal
- XENON_FLAG_W Definitions:
- Error Column Label:
XENONER
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
xenon
NMOL/KG
nmol/kg
None
xenon_l
NMOL/L
nmol/l
None
Dissolved xenon gas in sea water
PIGMENTS#
- Units:
None
- Data Type:
decimal
- PIGMENTS_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
pigments
None
None
None
Phytoplankton pigments
Note
This is almost always a placeholder for samples collected for HPLC analysis later, the results of which are published at NASA SeaBASS
SALTREF#
- Units:
G/KG
- Data Type:
decimal
- SALTREF_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
reference_salinity
G/KG
g/kg
sea_water_reference_salinity
Salinity reported on the Reference-Composition Salinity Scale, reported in units of “absolute salinity” (g/kg). If a sea water sample has the Reference Composition (defined in Millero et al., 2008), then its Reference Salinity is the best available estimate of its Absolute Salinity. For general purposes, Reference Salinity is (35.16504 g kg-1)/35 times Practical Salinity. Reference: www.teos-10.org; Millero et al., 2008 doi: 10.1016/j.dsr.2007.10.001.
Note
See “The composition of Standard Seawater and the definition of the Reference-Composition Salinity Scale” by Millero et. al (2007) 10.1016/j.dsr.2007.10.001
SF5CF3#
- Units:
FMOL/KG
FMOL/L
- Data Type:
decimal
- SF5CF3_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
trifluoromethylsulfur_pentafluoride
FMOL/KG
fmol/kg
None
trifluoromethylsulfur_pentafluoride_l
FMOL/L
fmol/l
None
Concentration of Trifluoromethyl Sulfur Pentafluoride
DWNPRS#
- Units:
DBAR
- Data Type:
decimal
- DWNPRS_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
downcast_pressure
DBAR
dbar
sea_water_pressure
Pressure on the downcast for the same isopycnal as the upcast
DWNOXY#
- Units:
UMOL/KG
- Data Type:
decimal
- DWNOXY_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
downcast_oxygen
UMOL/KG
umol/kg
moles_of_oxygen_per_unit_mass_in_sea_water
CTD Oxygen on the downcast for the same isopycnal as the upcast
SIG0#
- Units:
KG/M^3
- Data Type:
decimal
- SIG0_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
sigma0
KG/M^3
kg m-3
sea_water_sigma_theta
Potential density anomaly referenced to 0 dbar (ocean surface)
SOMSAL#
- Units:
PSS-78
- Data Type:
decimal
- SOMSAL_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
somma_salinity
PSS-78
1
sea_water_practical_salinity
Salinity measured by a Single-Operator Multiparameter Metabolic Analyzer (SOMMA), used in sea water CO2 analysis
HPLC#
- Units:
None
- Data Type:
string
- HPLC_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
hplc_placeholder
None
None
None
High-performance liquid chromatography
Note
This is a placeholder parameter which indicates water collected from a bottle for analysis
Warning
These data do not get submitted to CCHDO, most are sent to NASA SeaBASS
DNA#
- Units:
None
- Data Type:
string
- DNA_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
dna_placeholder
None
None
None
Genetic analysis
Note
This is a placeholder parameter which indicates water collected from a bottle for analysis
Warning
These data to not get submitted to CCHDO
UPTAKE#
- Units:
None
- Data Type:
string
- UPTAKE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
update_placeholder
None
None
None
Measures of uptake in incubation experiments
Note
This is a placeholder parameter which indicates water collected from a bottle for analysis
FCM#
- Units:
None
- Data Type:
string
- FCM_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
flow_cytometry_placeholder
None
None
None
Flow Cytometry
Note
This is a placeholder parameter which indicates water collected from a bottle for analysis
Warning
These data to not get submitted to CCHDO
ABUNDANCE#
- Units:
None
- Data Type:
string
- ABUNDANCE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
abundance_placeholder
None
None
None
Placeholder for cell counts of species
Note
This is a placeholder parameter which indicates water collected from a bottle for analysis
SIP#
- Units:
None
- Data Type:
string
- SIP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
stable_isotope_probing_placeholder
None
None
None
Stable isotope probing.
This describes samples taken for an uptake analysis which introduces stable isotopes and measures their uptake over a period of time.
Note
This is a placeholder parameter which indicates water collected from a bottle for analysis
QUOTA#
- Units:
None
- Data Type:
string
- QUOTA_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
quota_placeholder
None
None
None
Placehodler for cell-quota model measurements
Note
This is a placeholder parameter which indicates water collected from a bottle for analysis
IMAGES#
- Units:
None
- Data Type:
string
- IMAGES_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
image_placeholder
None
None
None
Imaging; for example a FlowCam
Note
This is a placeholder parameter which indicates water collected from a bottle for analysis
CDOM_NASA#
- Units:
None
- Data Type:
string
- CDOM_NASA_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdom_nasa_placeholder
None
None
None
Placholder for CDOM spectral absoptions performed by a group from NASA
Note
This is a placeholder parameter which indicates water collected from a bottle for analysis
CDOM_UCSB#
- Units:
None
- Data Type:
string
- CDOM_UCSB_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cdom_ucsb_placeholder
None
None
None
Placholder for CDOM spectral absoptions performed by a group from UCSB
Note
This is a placeholder parameter which indicates water collected from a bottle for analysis
MICROGELS#
- Units:
1E6 GELS/L
- Data Type:
decimal
- MICROGELS_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
microgel_abundance
1E6 GELS/L
1e6 l-1
None
Count of microgels per liter (abundance). Microgels are small organic particles formed by self-assembly and ionic bridging between organic macromolecules.
N2/ARGON#
- Units:
None
- Data Type:
decimal
- N2/ARGON_FLAG_W Definitions:
- Error Column Label:
N2/ARGON_ERROR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
n2_argon_ratio
None
None
None
Ratio of dissolved elemental nitrogen to dissolved argon
N2/ARGON_UNSTRIPPED#
- Units:
None
- Data Type:
decimal
- N2/ARGON_UNSTRIPPED_FLAG_W Definitions:
- Error Column Label:
N2/ARGON_UNSTRIPPED_ERROR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
n2_argon_ratio_unstripped
None
None
None
Ratio of dissolved elemental nitrogen to dissolved argon that has not been stripped of dissolved oxygen
Note
This is still fundamentally an N2/ARGON measurement and is a variation on an analytical technique. If following the corrections described in Charoenpong et al 2014 (DOI: 10.4319/lom.2014.12.323) then this should be comparable with any other N2/ARGON measurement but have a slightly larger uncertainty.
D15N_N2#
- Units:
/MILLE
- Data Type:
decimal
- D15N_N2_FLAG_W Definitions:
- Error Column Label:
D15N_N2_ERROR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
d15n_n2
/MILLE
1e-3
None
Enrichment of the 15N/14N isotopic ratio of dissolved elemental nitrogen. The usual reference material is the atmosphere of Earth (AIR).
O2/AR#
- Units:
None
- Data Type:
decimal
- O2/AR_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
o2_ar
None
None
None
Oxygen to Argon radtio
SMDEPTH#
- Units:
METERS
- Data Type:
decimal
- SMDEPTH_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
sm_depth
METERS
meters
None
Depth calculated from pressure using the Saunders-Mantyla method.
In the ODF software this is cited as follows:
Saunders, P. M., 1981. Practical Conversion of Pressure to Depth. Journal of Physical Oceanography 11, 573-574. Mantyla, A. W., 1982-1983. Private correspondence.
FMDEPTH#
- Units:
METERS
- Data Type:
decimal
- FMDEPTH_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
fm_depth
METERS
meters
None
Depth calculated from pressure using the Fofonoff and Millard method, also known as the UNESCO 1983 formula
CYANB#
- Units:
1/ML
- Data Type:
decimal
- CYANB_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
cyanobacteria_cell_count
1/ML
ml-1
None
Count of cyanobacteria
PHYTOP#
- Units:
1/ML
- Data Type:
decimal
- PHYTOP_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
phytoplankton_cell_count
1/ML
ml-1
None
Count of phytoplankton
HE3_HE4_RATIO#
- Units:
None
- Data Type:
decimal
- HE3_HE4_RATIO_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
he3_he4_ratio
None
None
None
Ratio of the stable isotopes of Helium-3 to Helium-4 that are dissolved in seawater
Nd_143_144_D_EPSILON_BOTTLE#
- Units:
10000
- Data Type:
decimal
- Nd_143_144_D_EPSILON_BOTTLE_FLAG_W Definitions:
- Error Column Label:
Nd_143_144_D_EPSILON_BOTTLE_ERROR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
nd_143_144_d_epsilon_bottle
10000
1e4
None
Atom ratio of dissolved Nd isotopes expressed in conventional notation
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Nd_143_144_D_RATIO_BOTTLE#
- Units:
None
- Data Type:
decimal
- Nd_143_144_D_RATIO_BOTTLE_FLAG_W Definitions:
- Error Column Label:
Nd_143_144_D_RATIO_BOTTLE_ERROR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
nd_143_144_d_ratio_bottle
None
None
None
Atom ratio of dissolved Nd isotopes
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Nd_D_CONC#
- Units:
PMOL/KG
- Data Type:
decimal
- Nd_D_CONC_FLAG_W Definitions:
- Error Column Label:
Nd_D_CONC_ERROR
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
nd_d_conc
PMOL/KG
pmol/kg
None
Concentration of dissolved “bulk” Neodymium in sea water
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
La_D_CONC_BOTTLE#
- Units:
PMOL/L
- Data Type:
decimal
- La_D_CONC_BOTTLE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
la_d_conc_bottle
PMOL/L
pmol/l
None
Dissolved Lanthanum in a discrete bottle sample
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Ce_D_CONC_BOTTLE#
- Units:
PMOL/L
- Data Type:
decimal
- Ce_D_CONC_BOTTLE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ce_d_conc_bottle
PMOL/L
pmol/l
None
Dissolved Cerium in a discrete bottle sample
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Pr_D_CONC_BOTTLE#
- Units:
PMOL/L
- Data Type:
decimal
- Pr_D_CONC_BOTTLE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
pr_d_conc_bottle
PMOL/L
pmol/l
None
Dissolved Praseodymium in a discrete bottle sample
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Sm_D_CONC_BOTTLE#
- Units:
PMOL/L
- Data Type:
decimal
- Sm_D_CONC_BOTTLE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
sm_d_conc_bottle
PMOL/L
pmol/l
None
Dissolved Samarium in a discrete bottle sample
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Eu_D_CONC_BOTTLE#
- Units:
PMOL/L
- Data Type:
decimal
- Eu_D_CONC_BOTTLE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
eu_d_conc_bottle
PMOL/L
pmol/l
None
Dissolved Europium in a discrete bottle sample
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Gd_D_CONC_BOTTLE#
- Units:
PMOL/L
- Data Type:
decimal
- Gd_D_CONC_BOTTLE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
gd_d_conc_bottle
PMOL/L
pmol/l
None
Dissolved Gadolinium in a discrete bottle sample
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Tb_D_CONC_BOTTLE#
- Units:
PMOL/L
- Data Type:
decimal
- Tb_D_CONC_BOTTLE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
tb_d_conc_bottle
PMOL/L
pmol/l
None
Dissolved Terbium in a discrete bottle sample
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Dy_D_CONC_BOTTLE#
- Units:
PMOL/L
- Data Type:
decimal
- Dy_D_CONC_BOTTLE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
dy_d_conc_bottle
PMOL/L
pmol/l
None
Dissolved Dysprosium in a discrete bottle sample
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Ho_D_CONC_BOTTLE#
- Units:
PMOL/L
- Data Type:
decimal
- Ho_D_CONC_BOTTLE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ho_d_conc_bottle
PMOL/L
pmol/l
None
Dissolved Holmium in a discrete bottle sample
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Er_D_CONC_BOTTLE#
- Units:
PMOL/L
- Data Type:
decimal
- Er_D_CONC_BOTTLE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
er_d_conc_bottle
PMOL/L
pmol/l
None
Dissolved Erbium in a discrete bottle sample
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Tm_D_CONC_BOTTLE#
- Units:
PMOL/L
- Data Type:
decimal
- Tm_D_CONC_BOTTLE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
tm_d_conc_bottle
PMOL/L
pmol/l
None
Dissolved Thulium in a discrete bottle sample
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Yb_D_CONC_BOTTLE#
- Units:
PMOL/L
- Data Type:
decimal
- Yb_D_CONC_BOTTLE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
yb_d_conc_bottle
PMOL/L
pmol/l
None
Dissolved Ytterbium in a discrete bottle sample
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
Lu_D_CONC_BOTTLE#
- Units:
PMOL/L
- Data Type:
decimal
- Lu_D_CONC_BOTTLE_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
lu_d_conc_bottle
PMOL/L
pmol/l
None
Dissovled Lutetium in a discrete bottle sample
Note
For maximum data reusability, we decided to use GEOTRACES naming conventions
STNNBR_U#
- Units:
None
- Data Type:
integer
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
user_station_number
None
None
None
User convienence statio number, unlike the canonical STNNBT param, this one must be an integer (so the NBR part of the name makse sense)
SAMPNO_U#
- Units:
None
- Data Type:
integer
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
user_sample_number
None
None
None
User convienence sample number, unlike the canonical SAMPNO param, this one must be an integer (so the NO part of the name makse sense)
BTLNBR_U#
- Units:
None
- Data Type:
integer
- BTLNBR_U_FLAG_W Definitions:
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
user_bottle_number
None
None
None
User convienence bottle number, unlike the canonical BTLNBR param, this one must be an integer (so the NBR part of the name makse sense)
LDEO_SAMPNO#
- Units:
None
- Data Type:
integer
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
ldeo_sample_number
None
None
None
Sample number used internally by LDEO
BNLID#
- Units:
None
- Data Type:
integer
- CF/netCDF Attributes:
nc_var
namewhp_unit
units
standard_name
bnlid
None
None
None
Brookhaven National Laboratory Identification bottle number